Products Description
Split Sets anchor bolt is a new type of anchor rod that is fully anchored and actively strengthens the surrounding rock.
Its three-dimensional part is a high-strength steel pipe with longitudinal joints.
When installed in a borehole slightly smaller than the diameter of the pipe, it can immediately apply radial pressure to the hole wall and prevent the sliding of the surrounding rock within the full length range.
In addition, the support force of the anchor rod tray support plate can make the surrounding rock in a three-dimensional stress state and achieve rock stability.
Product Information
- Material: Q235, 345B, 16 manganese K
- Diameter (thicker part): Φ30, Φ33, Φ40, Φ42, Φ43, Φ46, Φ47
- Length: 1200mm, 1500mm, 1800mm, 2000mm, 2500mm
- Thickness: 1.2mm, 1.5mm, 1.7mm, 1.8mm, 2.0mm, 2.2mm, 2.5mm, 2.75mm, 3.0mm, 3.5mm
- The width of the pipe seam shall not be less than 18mm, and the seam width shall be around 20mm
Method of use
- Determine the position of the anchor rod hole and use a drilling tool to drill the hole
- Blow out the rock powder inside the hole with compressed air
- Install the anchor plate on the rod and use an impact drill to drive the anchor rod into the hole
FAQ
Q: Who are we?
Q: How can we guarantee quality?
Q: What can you buy from us?
Q: Why should you buy from us not from other suppliers?
Q: What services can we provide?
corporate environment
Main Entrance/doorway
Anchor rod production equipment
Training Room
Company yard
Hot Tags: split sets anchor bolt for underground mining, China split sets anchor bolt for underground mining manufacturers, factory, Split Set Anchor, Split Set Roof Bolts, Friction Bolt, Split Set