Products feature
Engineered geotechnical ground anchor system designed for deep excavation tiebacks, retaining walls, and rock slope stabilization.
Threadbar Diameters: 25mm, 32mm, 40mm, 50mm (PSB830, PSB930, PSB1080 / ASTM A722 Gr. 150)
Anchor Configuration: Pre-assembled Free Stressing Length (Unbonded) & Bonded Length
Corrosion Protection: Double Corrosion Protection (DCP) corrugated HDPE duct or bare bar system
Standards Compliance: Engineered in full compliance with PTI (Post-Tensioning Institute) and EN 1537
Complete Kit: Centralizers/Spacers, Grout tubes, Anchor heads, Waler plates & Spherical nuts
Engineering Support: Send your anchor schedule for custom bonded/free-length fabrication drawings.
High-Capacity Tieback Anchors: Engineered for Critical Shoring & Slope Stability
Urban deep excavations, secant pile walls, and steep rock cuttings cannot afford anchorage failure. When ground anchors encounter aggressive soil chemistry, acidic groundwater, or high fluctuating groundwater tables, standard unprotected steel bars face catastrophic corrosion risks.
Our Geotechnical Ground Anchor & Tieback System is precision-manufactured to transfer high tensile holding loads deep into stable rock or dense soil strata. We provide fully pre-assembled anchor tendons-customized with exact bonded and free-stressing lengths-eliminating messy, error-prone on-site assembly and accelerating your retaining wall construction cycles.
Bonded Anchor Zone (Load Transfer Length):
Coarse, continuous hot-rolled thread profile maximizes grout-to-tendon and grout-to-ground interface friction.
Corrosion Protection Options: Available with factory pre-grouted corrugated HDPE/PP ducts (Double Corrosion Protection - DCP) to provide an impermeable barrier against moisture and chloride attack for permanent installations (50–100 years).
Fitted with heavy-duty centralizers/spacers every 1.5–2.0 meters to ensure guaranteed grout cover around the tendon.
Free Stressing (Unbonded) Length:
Encased in a smooth, high-density polyethylene (PE) sleeve filled with specialized anti-corrosion grease or wax.
Allows the bar to elongate freely without grout bonding during post-tension lock-off, transferring the anchoring force directly behind the active failure wedge.

High-Load Anchor Head Assembly:
Waler Beam Bearing Plates: Sized to distribute massive lock-off loads across steel waler beams or concrete capping beams without crushing.
Angle-Compensating Bevel Washers: Accommodate drilling inclination angles up to 30° to maintain perfect axial tension.
Heavy-Duty Spherical Anchor Nuts: Lock the tendon with zero slippage during hydraulic jack tension testing.

ypical Geotechnical & Structural Applications
Deep Excavation Shoring: Tiebacks for soldier piles with timber lagging, sheet pile bulkheads, and diaphragm (slurry) walls.
Rock & Soil Slope Remediation: Stabilizing fractured rock cuts along highways, railways, and dam abutments.
Uplift & Buoyancy Control: Resisting hydrostatic groundwater pressure beneath deep basements, dry docks, and water treatment tanks.
Dam & Bridge Abutment Tiedowns: Prestressing new structural concrete to underlying bedrock.
Quality Verification & On-Site Testing Assurance
Every ground anchor batch is fully traceable from the steel mill to jobsite delivery:
Testing Standard Compliance: Certified for on-site Acceptance Tests, Proof Tests, and Creep Tests in accordance with PTI or EN 1537.
Mill Test Certificate (EN 10204 3.1): Furnished with actual chemical heat analysis, yield/ultimate tensile curves, and elongation properties.
Integrity Guarantee: 100% thread gauge verified and pre-fitted with nuts prior to container packing.
Temporary (short-term) or Permanent (DCP required) application
Our geotechnical sales engineering team will generate a customized package within 4 hours:
Component layout drawing showing centralizer spacing and DCP transition seals.
Full hardware takeoff (Plates, Bevel washers, Nuts, Grout tubes).
Optimized freight estimate calculated for 20ft/40ft container loading.
Specification Table
| Parameter | Specifications |
| Applicable Standards | EN 1537 (Ground Anchors), PTI Recommendations, BS 8081, ASTM A722 |
| Service Life Classification | Temporary Anchors (≤ 2 years) / Permanent Anchors (> 2 years / 50-100 years design life) |
| Core Tendon Material | High-strength continuous threadbar (PSB830 / PSB930 / PSB1080 / 42CrMo) |
| Bar Nominal Diameters | Ø25 mm, Ø32 mm, Ø40 mm, Ø50 mm |
| Design Working Load | 150 kN to 1,200+ kN per anchor tendon |
| Free (Unbonded) Length | Smooth PE/PVC sleeve greased with rust-inhibiting wax for unrestricted elongation |
| Bonded Length Design | Bare bar or corrugated HDPE/PP duct pre-grouted for maximum bond shear capacity |
| Corrosion Protection Level | Class I (DCP - Double Corrosion Protection) / Class II (Encapsulated Grout) |
| Hardware Components | Waler bearing plates, Bevel washers (up to 30° angle), Spherical nuts, Grout caps |
application


Do you have a specific context in mind where you're considering their use? Then call me now?
Our address
Industrial Zone, Linmingguan Town, Yongnian District, Handan, China
Phone Number
easonoflangben@langben.net
Hot Tags: high-strength geotechnical ground anchors & tieback threadbars, China high-strength geotechnical ground anchors & tieback threadbars manufacturers, factory



