How To Use Cement Anchoring Agent

Select the anchoring agent according to the drilling diameter, immerse the anchoring agent in water for 30-40 seconds, push it into the anchor hole, and squeeze it tightly. Break the anchoring agent roll through the rod body, solidify and bond it to the rock hole and rod body, timely wedge the rod body at the hole mouth, install a gasket, and tighten the nut. Do not shift or shake the rod body before solidification, especially when installing the top eye.
2. Do not soak for more than 3 minutes.
3. The specification of this agent is 30mmx240mm per strand, and different specifications of anchoring agent rolls can also be processed according to user needs.
4. Every 10 pieces of this agent are packaged in a small package and sealed in plastic bags.
5. This agent needs to be stored in a dry place, and should be handled with care during transportation to prevent damage, moisture, and failure.